CO2 Tank Makeover V3.0

CO2 tank transformation

Completed painting the tank body. Took me 5 days to finish with 10-15 mins each day. Dont get the idea wrong that this task is hard. I just didn't rush to finish it.

Tips for nice and even paint job:-

(1) Shake the spray can vigorously before spraying
(2) Keep the spray nozzle approx 30cm (1ft) away from the paint area.
(3) Keep the work area free from wind - you do not want dust/dirt to stick on your paint area.
(4) Ensure your item (paint area) free from dust/dirt. Wipe with dry cloth or brush.
(5) Move can from side to side to allow fine spray distributed evenly. Keep it thin and allow each layer to dry before applying new coat. At least 6-10 mins depending on the paint thickness.
(6) Finish of with clear coat for sparkling and shiny paint (optional)

Anyone notice I have removed the knob? Here you go . . .

Old rusty knob transformation

Well, this is not done yet. I have removed all the rust and old paint away using 240 & 320 grid sandpaper together with penknife. Initially I thought it would be much easier to do looking at the size BUT I was wrong. It took me an hour to get the result as above picture.

I need to get another can of spray tomorrow to paint the knob. Probably will get metallic dark grey to match the tank colour.

Tiring day . . .

To be continued . . .

Custom Pendant Light

Stainless steel hanging kit installed on the ceiling

Close up shot

I have spent many days (perhaps week) trying to find suitable light fixture for my new 5ft tank but I failed to get one. Choices are quite limited and I have to race against time to get this issue sort out before my tank is delivered.

To make matter worse, I need pendant type instead of "on the tank - OTT" type. I have visited almost all major fish shop in Kuala Lumpur to source for 5ft T5 pendant light but ended up with Metal Halide option only.

Being persistent and stubborn, I got an idea to have it customize to my requirement.

It is going going to be T5HO 80w x 4 powered by 2 OSRAM high performance electronic ballast (as picture below). This ballast is made in Germany.


For the light bulb, I am opting for Giesemann Powerchrome Midday (6000K), either x4 or combination of x2 Giesemann and x2 Aqua Zonic Super Bright 10,000K.

Info on Giesemann light bulb (taken directly from Giesemann website);

POWERCHROME midday - a full spectrum lamp which closely imitates natural sunlight at 6000 Kelvin. Suitable for fresh-water, salt-water, reef aquariums
and terrariums.
Rated at 6,000 Kelvin with a spectrum designed to recreate sunlight in both fresh and salt water aquariums. This tube can be used on both freshwater and saltwater aquariums.

Stay tuned for more pictures and info . . .

Cant wait for the light set to arrive . . . few more days . . .

Iwagumi 50cm Tank - Progress

Tank progress from Day 1 to Today

Quick Maintenance

Staurogyne sp. & Peacock moss

Quick trimming on Staurogyne sp. and replant them on empty spot to create a denser growth. This plant love rich soil like ADA Amazonia II and grow very well without routine dosage of liquid fert.

Plucked off leaves from trimmed shoot of Staurogyne sp.

Water in - water out method for water change

From left to right : 1st hose - Inlet , 2nd hose - Outlet

Magnet glass cleaner is placed slightly below and close to hose outlet to disperse the water gently coupled with "L" plastic pipe to divert the water sideway instead of downward.

Inlet hose (1st hose) is also used with "L" plastic pipe to suck out debris on water surface, like a skimmer. I managed to obtain clean and clear water surface after each water change using this simple setup.

Waiting for water to fill up. Slow and steady.

If you are going to use WIWO method for water change, remember to dose anti-chlorine. I have my trusted Seachem Prime which require lower dosage compare to other brand. Large water change via WIWO method will put your fauna at risk if your water source is directly from the tap. I use cheap filtration system to treat my tap water source. Photo of the filter will be posted later.

All done.

Additives added in after each water change:-
1) 2 drops of ADA Green Bacter
2) 2 drops of ADA Phyton Git
3) 5ml of Seachem Excel

CO2 Tank Makeover V2.0

90% completed

Outcome after 4th coating (as picture above) and will spray one last coat to cover any small defect on the tank. I have removed the knob for sanding and repainting as the original paint slightly chipped off showing small patch of rust.

A bit lazy to finish everything today. Besides, I need to do water change for 50cm tank.

CO2 Tank Makeover

Complete makeover on 2.5kg Co2 tank
Note - It is not ADA co2 tank

Original colour of the co2 tank (picture above) is in green which does not suit well with my white wall. Since I do not have proper aquarium cabinet to keep it hidden, I have to get a simple makeover to ensure the tank complement with the surrounding furniture and most importantly the white wall. Click here to have a look of the tank blending with the wall.

I am going to repaint my 2nd co2 tank too while waiting for new tank to arrive.

Items required for the project :


1) Co2 tank (My 2nd co2 tank)
2) Aerosol spray (RM6.50 x1)
3) Masking tape (RM3.50 x1)
4) Sand paper (RM0.50 per piece x2) - Grid 240 (fine) and 320 (extra fine)
*price is in Ringgit Malaysia (RM)

Total cost = RM11.00, cheap makeover for your ugly looking co2 tank.

Step 1 - use the masking tape to cover the head/knob part (as picture below)

Masking tape to cover the head/knob

Step 2 - Use sandpaper to remove the original paint. Start with grid 240 sandpaper and finish it off with grid 320 to obtain a smooth surface. It is alright not to completely remove the original paint. Just ensure the original paint is thin enough and even surface is achieved. Most often that metal co2 tanks sold come with uneven paint job.

Step 3 - Use brush to remove paint dust.

Step 4 - Use old cloth to wipe it to ensure no paint dust residue otherwise new paint wont stick nicely.

Step 5 - Apply thin layer of paint and allow it to dry before applying 2nd layer. Patience is the key to nice and even coating.

First coat

It is getting a bit late for me to finish the paint job.

To be continued . . .

Equipment? (o_O)

(0_O)?

Equipment removed from cabinet for 4ft shallow tank. Both cabinet + tank have been dismantled and waiting to be replaced by 5ft tank + new cabinet.

. . . waiting to be "hidden" again into new cabinet.